Sign in or register to view your pricing and inventory.

3M 5304 Motor Lead Pigtail Splicing Kit; 250-500 KCMIL Feeder Cable, 4/0 AWG-500 KCMIL Motor Lead Cable

  • 3M 5304 3M 5304 Motor Lead Pigtail Splicing Kit; 250-500 KCMIL Feeder Cable, 4/0 AWG-500 KCMIL Motor Lead Cable
  • 3M 5304 Motor Lead Pigtail Splicing Kit; 250-500 KCMIL Feeder Cable, 4/0 AWG-500 KCMIL Motor Lead Cable
Manufacturer: 3M
Mfr. #: 5304
Item #: 13862
UPC: 054007122661
Login for Availability
Your Price:

Product Details

Designed to be used with copper compression, one-hole lugs

After being crimped onto the cables the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M motor lead splicing kit

Makes three splices and contains the necessary materials (except lugs) needed to make three splices

Accommodate the following splice configurations- 1000 Volt and less Pigtails (stub) connections, 1000 Volts and less inline connections, 5/8 Kilo-Volt shielded and non-shielded feeders pigtail (stub) connections, 5/8 Kilo-Volt shielded and non-shielded feeders inline connections

Fast and simple installation

No torches or heat source required

No special tools required to install splice

Single conductor cable

Detailed Description: 3M Motor lead pigtail splicing kit includes instruction sheet, three lug covers, three locking pins, three mastic sealing strips and three tubes of silicone grease. Kit is ideal for splicing 4/0 AWG - 250 kcmil sizes motor lead cable wire to incoming 250 - 500 kcmil sizes feeder cable wire, including the accommodation of pigtails connections at 0-1000 Volts. Kit makes three splices. It has the abrasion and puncture resistant properties.

Maximum bolt length is 1 1/2 Inch and lung cover inner diameter is 1.70 Inch. Lug cover is made using EPDM rubber as a slip-on. UL listed copper lugs and Scotchlok ™ 30,000 Series copper compression lugs can be used with kit. Kit is CSA certified.

Product Specification

Brand 3M
Catalog Description 3MÖ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The spliceÆs main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal.These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3MÖ ScotchlokÖ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used.Kit contents include:ò (3) Pigtail lug coversò (3) Mastic sealing stripsò (3) Locking pins (kits 5302û5304 only)ò (3) Tubes of silicone greaseò (1) Instruction sheet
GTIN

00054007122661

Height 4.3000
Height Unit IN
Item Status A
Length 9.3000
Length UOM IN
Mfr. # 5304
Type Pigtail (1 hole lugs)
UNSPSC 39121718
Width 5.6000
Width UOM IN