Size: 11.5 Inch Length x 23 Inch Height x 3-3/4 Inch Depth
Selector switch, fan / heat / off
Aluminum finish grille
Safety light illuminates when thermal cutout trips, turning off when limit resets
Safety limit turns off power to element if it overheats then automatically resets
20 gauge electro galvanized steel recess can with ground wire approved for direct contact with building insulation
Detailed Description:
King Electrical LPWA Series 1-Phase Fan-forced architectural wall heater with anodized aluminum finish has voltage rating of 277 Volts and power rating of 3000 Watts. It has heavy-duty cast iron unit bearing motor that is permanently lubricated with 20 cc of oil reservoir for quiet operation. It has 12-gauge aluminum constructed white color grill for providing durability. Motor rotating at full speed of 1300 RPM is used to drive 5-Blade aluminum fan that delivers 185 cfm of airflow. Element assemblies of the heater are constructed from coiled nickel chromium alloy that is wrapped in magnesium oxide insulator for providing sufficient heat. Element assembly is secured in steel sheathed heating tubes in a furnace brazed, plate-finned block design. The 3-Position fan/heat/OFF switch for easy speed/heat control and provides positive OFF option to disconnect all ungrounded conductors. It includes 20-Amps double pole circuit breaker/disconnector to provide protection to internal circuits.
Heater has 20-gauge electro-galvanized steel wallbox with factory installed copper ground wire for easy installation on to wall. Fan of the heater continues to operate after the thermostat shuts OFF in order to remove the residual heat left in the elements. Wall box is provided with three knockouts to provide access for power leads. Safety limit protection option in heater turns OFF the power automatically in the event of overheating. It has manual reset option that is used to turn OFF the device if thermal overload trips due to abnormal operating temperatures. It has 1-Pole built-in thermostat for indicating internal temperature of device and operates at temperature rating of 40 to 90 deg F. Safety light in heater illuminates if thermal cutout trips turns OFF. It requires 4-Inch of clearance to floors and 6-Inch of clearance to sidewall for wall mounting. It measures 11.5 Inch x 23 Inch x 3-3/4 Inch. It includes a 12-7/8 Inch Length x 23-1/4 Inch x 1-3/4 Inch grille. Heater is UL listed.
Dimensions | 11.5 Inch Length x 3-3/4 Inch Depth x 23 Inch Height |
Air Flow | 185 cfm |
Application | For Entryways, Corridors and All Public Areas |
Brand | King Electrical |
Finish | Anodized Aluminum |
Finish 2 | White |
Grille Dimension | 12-7/8 Inch Length x 23-1/4 Inch Height x 1-3/4 Inch Depth |
Heating Element | Steel Finned Tube Metal Sheath |
Housing Material | Steel |
Item | Fan-Forced Heater with Thermostat |
Mfr. # | LPWA2030-TP-CB2 |
Motor Speeds | 1300 RPM |
Mounting | Surface/Wall |
Phase | 1 |
Power Rating | 3000 Watt |
Standards | UL Listed E41422 |
Type | LPWA Series, Architectural Style, Double Pole |
Voltage Rating | 277 Volt |