Dimension: 6.625 Inch Length x 1.625 Inch Width
Minimizes wiring back to transformer
If one fixture goes out the rest remain on
Built-in auto reset, soft start, short and overload circuit protection features
The soft start delayed start feature extends lamp life by delaying the abrupt inrush current to the lamp
Dimmable with electronic low voltage dimmers, dimmers should always be installed on the primary side of the transformer
Enclosure has knockouts on three sides, screw holes are located on one long side for securing enclosure in place
Secondary wiring for Class 2 transformers does not require conduit sheathed cable or clamp wiring techniques
Detailed Description: WAC Lighting Remote Enclosed Electronic Transformer is made of aluminium and supplied with 6 feet long lead wire minimizes wiring back to transformer. Transformer is rated at primary voltage of 120 Volts, secondary voltage of 24 Volts and power rating of 60 Watts at 20 KHz frequency. It measures 6.625 Inch x 1.625 Inch x 1.125 Inch and ideal for use with tungsten filament lamps.Transformer includes a female connector, LED lamp and is dimmable with electronic low voltage (ELV) dimmer. It provides electronic short circuit protection with auto-reset, overload protection with auto-reset and automatic thermal regulation. Transformer requires a minimum load of 1W for consistent operation and is UL listed/CUL listed.
Brand | WAC Lighting |
Frequency Rating | 20 Kilo Hz |
Height | 1-1/8 Inch |
Item | Electronic Transformer |
Length | 6-5/8 Inch |
Mfr. # | EN-2460-RB2 |
Power Rating | 60 Watt |
Primary Voltage | 120 Volt |
Secondary Voltage | 24 Volt |
Standards | Class 2, UL Listed |
Type | Remote Enclosed |
Width | 1-5/8 Inch |