Schneider Electric / Square D LC1D18JD TeSys® D-Line Full Voltage Contactor; 3 Pole, 18 Amp Full Load, 690 Volt AC, 300 Volt DC, Plate/Rail Mount

Detailed Description: Schneider Electric / Square D TeSys D Non-reversing contactor is suitable for switching a power circuit, similar to a relay except with higher current ratings. It operates at a current rating of 18 Amps and a voltage rating of 600 VAC. It measures 1.770 Inch x 3.740 Inch x 3.030 Inch. It has three poles and helps to resist load current. It can be mounted on plate as well as rail with ease and has ring tongue type connection.

Contactor operates at voltage of less than or equal to 690 VAC with 690 VDC at 25-400 Hz for power circuit. It has DC control circuit type and has a circuit voltage of 12 VDC at 50/60 Hz. It produces a average impedance of 2.5 Ohm that operates at 50 Hz - It has 32 Amps for power circuit. It produces a power dissipation of 0.8 W AC-3 and 2.5 W AC-1. It meets the standards of EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508 and is CCC, CSA, GOST, UL certified.