Works properly even if spring is broken
Doesn't reset if out of adjustment
XY2CE for applications up to 165 ft
Schneider Electric / Square D e-stop Left cable mount rope pull switch uses two NO and two NC contact illuminated, booted push button for convenient ON/OFF operation. It has Zamak constructed body and corrosion resistant stainless steel made cover for durability. It is used to trigger up to 165 ft long cable and can be tripped at any point in work zone. Switch is rated for maximum insulation voltage of 500 Volts, maximum impulse withstand voltage of 6 kilo-Volts and thermal current of 10 Amps. It has vibration resistance of 50 gn and shock resistance of 50 gn for a duration of 11 milli-seconds. Switch has resistance of 25 milli-Ohms between terminals for offering better conductivity.
Switch is rated for voltage range of 24 - 380 Volts. It has a mechanical life of 10000 operating cycle for emergency stop. Switch has three plain holes with 1/2 Inch - 14 NPT gland to easily accommodate one 20 AWG and two 16 AWG cable. It uses slow-make slow-break technique in contact operation for emergency stop. It uses 10 Amps current rated type SC fuse for providing short circuit protection.
Switch is designed to use in conveyor systems, material handling, machine tools and electrical testing stations. It has terminal clamp tightening torque of 0.8 Nm for easier conductor connection. Switch is recommended to use in icy and harsh outdoor condition. It operates within a temperature range of -27 to 70 deg C and stored within a temperature range of -40 to 70 deg C. It is IP65 rated for maximum degree of protection. Switch is UL listed and CSA certified.
|Brand||Telemecanique Emergency stop rope pull switches XY2C|
|Catalog Description||Schneider Electric,CABLE PULL SWITCH 300VAC 10AMP XY2CE+OPTIONS,-25...70 ¦C,10 A,2 NC + 2 NO,Preventa XY2,latching emergency stop rope pull switch,XY2CE,XY2CE|
|Closed Contact Resistance||25 MOHM EN/IEC 60255-7 CATEGORY 3-25 MOHM NF C 93-050 METHOD A|
|Connection||SCREW CLAMP TERMINAL, 1 X 0.5...2 X 1.5 MMA|
|Contact Configuration||2 NC + 2 NO|
|Finish 2||RED RAL 3000|
|Operating Temperature||-25-70 AC|
|Special Features||WITHOUT PILOT LIGHT|
|Standard||10 GN 10-300 HZ)EN/IEC 60068-2-6,50 GN 11 MS EN/IEC 60068-2-27,CSA C22.2 NO 14-EN/ISO 13850-WORK EQUIPMENT DIRECTIVE 2009/104/EC-EN/IEC 60204-1-EN/IEC 60947-5-1-MACHINERY DIRECTIVE 2006/42/EC-EN/IEC 60947-5-5-UL 508,IP66 IEC 60529,UL CATEGORY NISD EMERGENCY STOP DEVICES-CSA-CCC|
|Type||Latching emergency stop rope pull switch|
|Voltage Rating||3 A 240 V, AC-15, A300 EN/IEC 60947-5-1 APPENDIX A-0.27 A 250 V, DC-13, Q300 EN/IEC 60947-5-1 APPENDIX A|