Schneider Electric / Square D XS130B3PAM12 OsiSense® Inductive Proximity Sensor; 12 - 24 Volt DC, 15 mm Sensing Distance, 3 Wire, PNP, DC Output, 1 NO Operating Mode

Detailed Description: Schneider Electric / Square D Inductive proximity sensor is made of sturdy metal and comes with a cylindrical M30 design. It has 4-pin and M12 male connector. The 3-Wire sensor has fixed type body and a nominal sensing distance of 0.59 Inch. It has 1 NO discrete output function and DC type output circuit. Sensor has a rated supply voltage of 12 - 24 VDC with reverse polarity protection and switching capacity of 200 milli-Amps DC with overload/short circuit protection. Sensor has frontal face detection made of PPS with M30 x 1.5 ISO thread and nickel plated brass enclosure. It operates within 0 - 0.47 Inch and has a differential travel of 1 - 15% of Sr. It comes with a yellow LED to indicate output state.

Sensor has supply voltage limit of 10 - 36 VDC, current consumption of 10 milli-Amps at no-load and switching frequency is less than equal to 500 Hz. It has a voltage drop of less than equal to 2 Volts at closed state, first up delay of less than equal to 10 ms, delay response of less than equal to 0.6 ms and delay recovery of less than equal to 1.4 ms. Sensor has an operating temperature of -13 to 158 deg F, storage temperature of -40 to 185 deg F, vibration resistance of 25 gn amplitude conforming to IEC 60068-2-6 and shock resistance of 50 gn for 11 ms conforming to IEC 60068-2-27. Sensor is CSA/UL certified.