Mounting on 35 mm DIN3 track or 4 screw direct mounting
Screws in open ?ready-to-tighten? position
Detailed Description: Square D by Schneider Electric control relay are 600 volt relays are approved for use around the world. K-Line relays are usually mounted on 35mm DIN 3 track, but can also be mounted directly to a panel. One version of this relay can be printed circuit board mounted. A low power consumption version of this relay is available for use with low level DC signals from a computer or a PLC. The fixed contacts in these relays have a NEMA A600 and Q600 ratings, in addition to the standard IEC ratings, making them suitable for use in most any control circuit.
Amperage Rating | 10 A AT <= 50 C |
Application | Control circuit |
Brand | TeSys |
Catalog Description | Schneider Electric,CONTROL RELAY 600VAC 10AMP IEC +OPTIONS,-25...50 ¦C,10 A at <= 50 ¦C,120VAC,3 NO + 1 NC,IP2x,Screw Clamp,TeSys,UL Listed File Number 164353 CCN NKCR - CSA Certified File Number LR43364 Class 3211 03 - CE Marked,control circuit,control relay,plate-rail |
Coil | 120 V AC 50/60 Hz |
Connection | screw clamp terminals 1 1.5-4 mmsolid; screw clamp terminals 2 1.5-4 mmsolid; screw clamp terminals 1 0.75-4 mmflexible with cable end; screw clamp terminals 2 0.75-4 mmflexible without cable end; screw clamp terminals 1 0.34-1.5 mmflexible with cable end; screw clamp terminals 2 0.34-1.5 mmflexible without cable end |
Contact Configuration | 3 NO + 1 NC |
Contact Rating | <= 690 V <= 400 HZ |
Enclosure | IP2X |
GTIN |
00785901866190 |
Height | 2.0000 |
Height Unit | IN |
Item Status | A |
Length | 2.4000 |
Length UOM | IN |
Mfr. # | CA2KN31G7 |
Mounting | Rail;plate |
Operating Cycles | 10000 CYC/H |
Operating Temperature | -25-50 AC |
Size | 2.24 |
Standard | IP2X,UL-CSA,V1 UL 94-REQUIREMENT 2 NF F 16-101-REQUIREMENT 2 NF F 16-102 |
Sub-Brand | TeSys CAK;CA2K |
Type | Control relay |
UNSPSC | 39122331 |
Width | 2.5000 |
Width UOM | IN |