Schneider Electric / Square D Pumptrol® Pressure switch is used to control air in small electrically driven air compressors. It has a 9013FH pressure sensor of size 200 psi that switches OFF at 140 psi. Switch has rugged polypropylene cover for added durability. It has a nitrile diaphragm pressure actuator that operates from any position. It regulates between two thresholds. The four-terminal block switch comes with 5.261 Sq.mm and 10 AWG screw-clamp terminals for electrical connection. Switch has an adjustable rising pressure range of 70 - 150 psi at 30 psi approximate adjustable differential.
Switch with two NC, Form YY, DPST-DB, snap-action contact type for high conductivity. It provides cable entry through two 0.88-Inch cable entries with 0.84-Inch across flats. It has a fixed differential scale type for internal settings and a 0.25-Inch 4-Way flange fluid connection. Switch is compatible with 3-Phase motors rated at 0.75 kilo-Watt at 575/460 VAC, 3-Phase motor rated at 2.2 kilo-Watt at 230 VAC, 3-Phase motor rated at 1.5 kilo-Watts at 115 VAC, 1-Phase motor rated at 1.1 kilo-Watts at 115 VAC and 1-Phase motor rated at 1.5 kilo-Watts at 230 VAC.
Switch operates at a rate of 10 cycles/minute and provides electrical durability of 100000 cycles at 10 cycles/minute with mechanical durability of 300000 cycles. It measures 4.45 Inch x 3.76 Inch x 2.78 Inch. It is included with a type gG, 20-Amp cartridge fuse for short circuit protection. Switch has a destruction pressure of 220 psi and gives a repeat accuracy of +/-3%. It operates and allows to store at a temperature of -33 to 257 degree Fahrenheit. Suitable for pressure control or monitoring of water pumps, compressors, agricultural/irrigation water systems, molding presses, injection molders, grinding machines, machining centers, complex and special machines. Switch is NEMA 1 and IP20 rated for use in hazardous locations. Switch is UL listed, CSA certified and meets CE standards.
|Application||Control small electrically driven air compressors;Power circuit;Regulation between 2 thresholds|
|Brand||Square D Pumptrol|
|Catalog Description||Schneider Electric,PRESSURE SWITCH 575VAC 1HP F +OPTIONS,0.25 inch 4-way flange conforming to UL 508,100...200 psi,200 psi,40 psi,off at 140 psi,2-way pressure release valve,air (-22...257 ¦F),control small electrically driven air compressors|
|Contact Configuration||2 NC, snap action, DPST-DB, Form YY|
|Enclosure||NEMA 1 UL 50|
|Increasing Range||100200psi (689.481378.95kPa)|
|Operating Cycles||10 CYC/MN|
|Operating Temperature||-33-257 AF|
|Process Connection||0.25 INCH 4-WAY FLANGE UL 508|
|Process Fluid||AIR -22-257 AF)|
|Special Features||2-way pressure release valve|
|Standard||CSA FILE LR25490-UL LISTED FILE E12158,IP20 IEC 60529,UL 508-CE|
|System Pressure||200 PSI|
|Type||Electromechanical pressure switch;Fixed differential|