Schneider Electric / Square D 9012GPG2 Adjustable Differential Pressure Switch; 2000 psi, 1/4-18 NPTF, 1 NO-1 NC, SPDT, 480 Volt AC, 10 Amp

Detailed Description: Schneider Electric / Square D Adjustable differential pressure switch is used to control non-corrosive gas, air, non-corrosive liquids and hydraulic oil at a maximum pressure of 2000 psi. It has a 9012G pressure sensor of size 2900 psi. Switch has sturdy thermoplastic enclosure for durability. Nitrile diaphragm pressure actuator operates from any position. It is regulates and monitors between two thresholds. Switch has a current rating of 0.22 Amp at 125 VDC, 0.27 Amp at 250 VDC, 6 Amps at 120 VAC and 3 Amps at 240 VAC.

Switch is furnished with screw-clamp terminals that accommodate 22 - 12 AWG conductors. Switch has an adjustable scale type with a pressure range of 90 - 2900 psi on decreasing pressure and has an approximate differential of 19 - 98 psi +/-2.5% full scale at mid-range. Switch with form C, NC-NO, SPDT, snap-action, silver nickel contacts contact type for high conductivity. It provides cable entry through 0.5-Inch NPT conduit entrance. It has 0.25-Inch 18 NPTF fluid connection type.

Switch operates at a rate of 120 cycles/minute and provides mechanical durability of 5000000 cycles. It measures 6.84 Inch x 2.75 Inch x 2.21 Inch. It is included with a 10-Amp type gL cartridge fuse for overload and short circuit protection. Switch gives a repeat accuracy of < 4%. It operates and allows to store at a temperature of -10 to 185 degree Fahrenheit. It provides 2 gn vibration resistance and 50 gn shock resistance. Suitable for pressure control or monitoring of water pumps, compressors, agricultural/irrigation water systems, molding presses, injection molders, grinding machines, machining centers, complex and special machines. Switch is NEMA 1 rated for use in hazardous locations. Switch is UL listed, CSA certified and meets CE standards.