Schneider Electric / Square D S29386 Powerpact® Shunt Trip; 110/130 Volt AC

Trips the circuit breaker when the control voltage rises above 70% of its rated voltage

Tripping by the shunt trip or underVoltage trip has priority over manual (or motor operator) closing, in the presence of a standing trip order such an action does not result in any closing, even temporarily, of the main contacts

The circuit breaker must be reset locally after being tripped by shunt trip (MX)

AC shunt trips are suitable for ground-fault protection when combined with a Class I ground-fault sensing element

Impulse type 20 ms or maintained control signals

Endurance is 50% of the rated mechanical endurance of the circuit breaker

Clearing time- Less Than 50 ms

A voltage release can be used to trip the circuit breaker using a control signal