Supply voltage is provided by the amplifier to which the sensor is connected
Includes alignment indicator device (aid) located on rear panel
Reinforced construction, totally encapsulated, o-ring sealing
Detailed Description: Banner Mini-Beam Namur Retro reflective polarized sensor is secured by clear acrylic lens and rectangular, durable thermoplastic housing. It uses visible red LED as sensing beam with maximum sensing range of 2 m and response time of 5 milli-second. Sensor is switchable between light/dark conditions. Sensor works with supply voltage of 5 - 15 VDC. Output beam passes lesser than or equal to 1.2 milli-Amps current in dark condition and greater than or equal to 2.1 milli-Amps current in light condition. It includes internal multi-turn potentiometer to adjust sensitivity control for error free operation. It uses integral QD connector with four pins for external connection. Sensor operates within temperature range of -40 to 70 deg C. Sensor is NEMA, IP67 rated and CSA certified.
Application | For Use With Approved Switching Amplifiers With Intrinsically Safe Input Circuits |
Brand | Banner |
Catalog Description | MINI-BEAM MIAD9 Series Polarized Retroreflective Mode Sensor,5 - 15 VDC,Sensing Range: 50 MM - 2 MR,650 NMTR Visible Red LED Sensing Beam,Output: NAMUR 2-Wire, Constant Current: Less Than Or Equal To 1.2 MILAMP Dark and Greater Than 2.1 MILAMP Light,Acryl |
Connection | 4-Pin Euro Integral Quick Disconnect |
Country Of Origin | USA |
Degree Of Protection | IP67 |
Enclosure | IEC IP67 NEMA 1, 2, 3, 3S, 4, 4X, 6, 12 and 13 Thermoplastic Polyester |
Environmental Conditions | 90% At 50 deg C Humidity |
GTIN |
00662488372941 |
Item | Photoelectric Sensor |
Lens | Acrylic |
Material | Thermoplastic |
Mfr. # | MIAD9LVAGQ |
Operating Mode | Light/Dark |
Operating Temperature | -40 To 70 |
Output | Constant Current NAMUR, <=1.2 Milli-Amp Dark, >=2.1 Milli-Amp Light |
Response Time | 5 ms |
Sensing Beam | Visible Red LED |
Sensing Distance | 50 mm - 2 m |
Sensing Method | Polarized Retroreflective |
Sensing Range | 50 MM - 2 MR |
Size | 12.2 Inch Length x 66 mm Width x 24.1 mm Height |
Special Features | Rectangular with M18 barrel housing style; Intrinsically safe sensors with MINI-BEAM performance and small size; Supply voltage is provided by the amplifier to which the sensor is connected; Includes Alignment Indicator Device (AID) located on rear panel; Reinforced construction, totally encapsulated, O-ring sealing, acrylic lenses and stainless steel screws; Potentiometer located on Rear Panel and Protected by a Clear Gasketed Acrylic Cover |
Standard | DIN 19 234, EN 50 014 Part 1. 1977, EN50 020 Part 7. 1977, Factory Mutual #3610 And 3611, CSA 22.2 #157-92 And 22.2 #213-M1987, ETL Listed, CE, Ex, FM Approved |
Standards | DIN 19 234, EN 50 014 Part 1. 1977, EN50 020 Part 7. 1977, Factory Mutual #3610 And 3611, CSA 22.2 #157-92 And 22.2 #213-M1987, ETL Listed, CE, Ex, FM Approved |
Sub Brand | Mini-Beam® |
Type | MIAD9 Series Polarized Retroreflective Mode Sensor |
Voltage Rating | 5 - 15 Volt |