Detailed Description: Ferraz Shawmut Amp-Trap® Molded rubber insulating sleeve is suitable to clear and isolate faults quickly in cables that increases the reliability of service entrance and distribution runs. The cable protector is ideal for use with 500 kcmil cable. It measures 2.440 Inch diameter x 8.940 Inch. The fiberglass body of the insulating sleeve provides dimensional stability in harsh environments. It has voltage rating of 600 VAC and has a interrupt current rating of 200 kilo-Amps. It carries low cable overloads that are handled by standard protective devices. Insulating sleeve is UL listed.
Brand | Ferraz Shawmut |
Catalog Description | Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used. 500 MCM Boot for Cable to Buss Connection |
GTIN |
00782001935498 |
Height | 2.4400 |
Height Unit | IN |
Item Status | A |
Length | 8.9400 |
Length UOM | IN |
Material | Molded Rubber |
Mfr. # | 500CBR |
Special Features | Fiberglass bodies for dimensional stability in harsh environments Catalog number stamped into terminal for permanent identification Crimp terminals for aluminum cable include oxide inhibitor Molded rubber boots available for insulation and protection Current-limiting device Permitted by code Available with various termination types for connection to cable, bus, offset bus and mole conductors |
Type | Cable Protector |
UNSPSC | 39121627 |
Voltage Rating | 600 |
Width | 2.4400 |
Width UOM | IN |