Dimension: 3.125 Inch Length x 12.875 Inch Width
The sleek design of the D-Series Floodlights reflects the embedded high performance LED technology
It the ideal long-life replacement for 150 - 250 Watt metal halide floods, with typical energy savings of 70% and expected service life of over 100000 hours
Detailed Description:
Lithonia / Acuity LED Flood light in dark bronze finish has sleek design that reflects the embedded high performance LED technology. Luminaire can be used for landscape, accent, signage, security and general area lighting in many commercial as well as residential applications. It features low EPA for efficient pole wind loading. Durable die-cast aluminum housing features integral heat sink fins to optimize thermal management through convective and conductive cooling. Housing is completely protected from moisture as well as environmental contaminants. To promote low operating temperature and long life, the LED driver is mounted in direct contact with the casting.
Flood luminaire provides a color temperature of 4000 K at 67 CRI. For superior field-to-beam ratios, uniformity, spacing, a wide variety of precision-molded vacuum-metalized specular reflectors are engineered. Four chip-on-board light engines can be directly coupled to the housing to maximize heat dissipation and promote long life. LED drivers have a power factor of greater than 90% and produce an enhanced output at 100000 hours of operation. Luminaire operates at a voltage rating of 277 Volts.
Flood luminaire provides wide beam distribution. It measures 3.125 Inch x 12.875 Inch. A zinc-infused Super Durable TGIC thermoset powder coat finish offers superior resistance to corrosion and weathering while protecting the exterior parts. The multi-stage process ensures a minimum 3 mil thickness for a finish that can withstand extreme climate changes without peeling or cracking.
Luminaire allows quick and easy installation to various mounting accessories with integral slip fitter, adjustable knuckle or yoke mounting options. The 1/2-Inch NPS threaded pipe knuckle mounting offers flexibility while mounting fixtures. This connection enables the light to withstand up to a 1.5 G vibration load rating per ANSI C136.31. Luminaire is IP65 rated and rated for -40 deg C minimum ambient. Luminaire is CSA certified to U.S. and Canadian standards.
Dimensions | 3.125 Inch Length x 12.875 Inch Width |
Alternate Part Number | 213PCX |
Amperage Rating | 0.73 Amp at 120 Volt, 0.42 Amp at 208 Volt, 0.37 Amp at 240 Volt, 0.32 Amp at 277 Volt, 0.25 Amp at 347 Volt, 0.18 Amp at 480 Volt |
Application | For Commercial And Residential Landscape, Signage, Accent, Security And General Area Lightings |
Ballast Type | Not Applicable |
Base | Not Applicable |
Brand | Lithonia Lighting / Acuity |
Catalog Description | D-Series Size 2 LED Flood Luminaire, LED, 4 light engines, 40K color temperature |
Country Of Origin | USA |
Degree Of Protection | IP65 |
Driver Type | Class 1 Electronic |
Finish 2 | Bronze |
Fixture Finish | Bronze |
Fixture Type | Flood Light |
GTIN |
00753573385554 |
GTIN Next Lower Level Sub Pack | 00753573385554 |
Height | 13.5800 |
Item | Flood Light |
Lamp Type | 4000K |
Length | 13.7800 |
Mfr. # | DSXF2LED440KM2 |
Mounting | Ground, Pole, Wall |
Number Of Lamps | Not Applicable |
Power Factor | >90% |
Reflector Type | Precision-Molded Vacuum-Metallized Specular |
Special Features | The sleek design of the D-Series Floodlights reflects the embedded high performance LED technology. They are ideal for landscape, signage, accent, security and general area lighting in many commercial and residential applications. |
Standard | CSA, DLC, IP65 |
Standards | CSA Certified, DLC Qualified |
Type | D Series |
Voltage Rating | 120-277, MVOLT |
Wattage | 79 Watt |
Width | 4.1300 |