Size: 11.500 Inch Length x 20.500 Inch Height x 3.7500 Inch Depth
King Electrical LPW Series 1-Phase Fan-forced wall heater in bright white color has voltage rating of 277 Volts and power rating of 4000 Watts. It has heavy-duty cast iron unit bearing motor that is permanently lubricated with 10 cc of oil reservoir for quiet operation. It has 20-gauge steel constructed white color grill for providing durability and is powder coated to resist corrosion. Motor rotating at full speed is used to drive five-blade aluminum fan that delivers 185 cfm of airflow. Element assemblies of the heater are constructed from coiled nickel chromium alloy that is wrapped in magnesium oxide insulator for providing sufficient heat. Pic-A-Watt® Element is provided with seven wattage configuration for field installation. Element assembly is secured in steel sheathed heating tubes in a furnace brazed, plate-finned block design. The 3-Position fan/heat/OFF switch for easy speed/heat control and provides positive OFF option to disconnect all ungrounded conductors.
Heater with powder coated paint finish has 20-gauge electro-galvanized steel wallbox with factory installed copper ground wire for easy installation on to wall. Wall box is provided with three knockouts to provide access for power leads. Thermal start bi-metallic limit protection option in heater turns OFF the power automatically in the event of overheating. It has manual reset option that is used to turn OFF the device if thermal overload trips due to abnormal operating temperatures. It has 1-Pole built-in thermostat for indicating internal temperature of device and operates at temperature rating of 40 to 90 deg F. Safety light in heater illuminates if thermal cutout trips turns OFF. It is used in residential and commercial areas. It requires 4-Inch of clearance to floors and 6-Inch of clearance to sidewall for wall mounting. It measures 11.500 Inch x 20.500 Inch x 3.7500 Inch. It includes a 13 Inch x 21-3/4 Inch x 3/4 Inch grille. Heater is UL listed.