0 - 15 Milli-Amp Current consumption at no-load
<=200 Milli-Amp DC Switching capacity with overload and short-circuit protection
<=1.8 Volt voltage drop at closed state
Detailed Description:
Schneider Electric / Square D Inductive proximity sensor is made of metal and comes with cylindrical M30 design. It has cable type electrical connection. The 3-Wire sensor has fixed type body and a nominal sensing distance of 0.39 Inch. It has 1 NC discrete output function and DC type output circuit. Sensor has a rated supply voltage of 12 - 48 VDC with reverse polarity protection and switching capacity of 200 milli-Amps with overload/short-circuit protection. Sensor has frontal face detection made of PPS and nickel-plated brass enclosure. It operates within 0 - 0.31 Inch and has a differential travel of 3 - 15% of Sr.
Sensor comes with a PvR insulated wire and has a cable composition of 3 x 0.34 sq.mm. It comes with a red LED to indicate output state. Sensor has supply voltage limit of 10 - 58 VDC, current consumption of 0 - 15 milli-Amps at no-load and switching frequency is less than equal to 100 Hz. Sensor has a voltage drop of less than equal to 1.8 Volts at closed state and run up delay at power up to 9 s. Sensor has an operating temperature of -13 to 158 deg F. Sensor is CCC/CSA/UL certified and RoHS compliant.
Brand | Telemecanique Inductive proximity sensors XS |
Catalog Description | Schneider Electric,INDUCTIVE SENSOR 58VDC 200MA XS +OPTIONS,-25...70 ¦C,0.39 in (10 mm),1 LED red for output state,1 NC, PNP,10...58 V DC,12...48 V DC with reverse polarity protection,2 m,cable,30 mm,81 mm,81 mm,cylindrical M30,nickel plated brass,30 mm,81 mm,inductive proximity sensor,<= 100 Hz,Application,rotation monitoring,IP67 conforming to IEC 60529,OsiSense,UL-CCC-CSA,flush mountable,inductive proximity sensor,metal |
GTIN |
00785901231813 |
Height | 5.2000 |
Height Unit | IN |
Item Status | A |
Length | 3.19 |
Length UOM | IN |
Mfr. # | XSAV11373 |
UNSPSC | 39122230 |
Width | 1.7000 |
Width UOM | IN |