Schneider Electric / Square D LC1DT40FD TeSys® D-Line Full Voltage Contactor; 4 Pole, 40 Amp, 690 Volt AC, 300 Volt DC, Plate/Rail Mount

Detailed Description: Schneider Electric / Square D TeSys D Non-reversing contactor is suitable for switching a power circuit, similar to a relay except with higher current ratings and helps to resist load current. It operates at a current rating of 40 Amps and a voltage rating of 600 VAC. It has four poles and provides a cover for superior protection. Contactor can be mounted on plate as well as rail with ease. It has built-in bidirectional peak limiting diode suppressor. It operates at voltage of less than or equal to 690 VDC with 690 VAC at 25-400 Hz for power circuit.

Contactor has DC standard control circuit type and has a circuit voltage of 110 VDC. It produces an average impedance of 2 Ohm that operates at 50 Hz - It has 40 Amps for power circuit. It has 3.2 W AC-1 power dissipation per pole. It meets the standards of EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508 and is BV, CCC, CSA, DNV, GL, UL certified.