Designed using 3M proprietary cold shrink delivery system
Supplied prestretched on a removable core for efficiency and ease of installation
Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture-tight seal
Listed for availability only and are not designed to be used as primary insulation, these tubes are for conduit sealing and breakouts
Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated to 1000 Volt
1.68 Inch minimum cable diameter for seal
3.69 Inch maximum diameter insulator cable or connector covers
Resists water, fungus, ozone, alkalies, acids
Detailed Description: 3M Cold shrink connector insulator in black color is made of specially formulated EPDM material to provide permanent, durable environment sealing and insulation. It can accommodate 1250 - 2000 kcmil wires. Connector insulator has a voltage rating of 1000 Volts or less. It is non-shielded and has a temperature rating of -40 to 194 deg F. It offers tape shielding, wire shielding and unisheilding. Insulator has a relaxed tube length of 9 inches. Connector insulator is RoHS compliant and meets ANSI C1191.1 standards.
Brand | 3M |
Catalog Description | 3MÖ Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3MÆs proprietary cold shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated EPDM material promotes a permanent, durable environmental seal and insulation, with a typical operating temperature range from -40û194¦F (-40û90¦C).The 8420 insulator meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV.Applications: Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated to 1000 V. Good for repairs and environmental sealing for communication and other non-electrical applications.Important: Use insulation jacket or connector O.D. for final ordering criteria.* Mastic pads included for cable O.D. build-up. ** Kit contains adapters. *** These sizes are listed for availability only and are not designed to be usedas primary insulation. These tubes are for conduit sealing and breakouts. ****Maximum connector length: 5.625Point of Purchase packaging designated by P. Example: 8423-6P |
GTIN |
00054007421474 |
Height | 11.2000 |
Height Unit | IN |
Item Status | A |
Length | 17.7000 |
Length UOM | IN |
Mfr. # | 8430-9 |
Type | Cold Shrink Splice |
UNSPSC | 39121721 |
Width | 11.9000 |
Width UOM | IN |