Dimension: 3.900 Inch OD x 12 Inch Length
One-piece versatile design, allowing quick installation and accommodating a wide range of cable sizes
Cold shrink delivery system for easy installation, simply place termination over prepared cable and unwind core to shrink into place (no force fit required)
Silicone rubber insulators, EPDM stress control tubes, stress controlling compound and environmental sealing compound are compatible with all common solid dielectric insulations, such as polyethylene (PE), cross-linked polyethylene (XLPE) and ethylene propylene rubber (EPR)
No torches or heat required
Good solvent resistance, compatible with industry-approved cable cleaners
Excellent resistance to ozone and ultra-violet radiation
High dry and wet insulation resistance
Detailed Description:
3M 7600-T-3G Series Cold shrink QT-III termination kit with high-k stress relief is designed for three conductor type "G" copper tape shield and armored cables. It measures 3.900 Inch outer diameter x 12 Inch. Kit includes a cold shrink silicone rubber breakout boot assembly, a cold shrink silicone rubber jacket seal assembly, a tinned copper ground braid assembly, a 3/4-Inch roll Scotch ® super 33+ vinyl electrical tape of, a 1-1/2-Inch roll Scotch ® vinyl electrical tape super 88, a constant-force spring, a roll Scotch ® electrical shielding tape 24, a cable cleaning preparation kit CC-2 and an instruction sheet.
It also contains three silicone rubber phase re-jacketing sleeve assemblies, three cold shrink silicone rubber termination assemblies, three constant-force springs, three 1/2 Inch x 10 Inch semi copper foil shielding tape 1181 strips and eight strips Scotch ® mastic strip 2230.
Cable termination kit is ideal for 5 kilo-Volts cable with 400 - 500 kcmil conductor size and 8 kilo-Volts cable with 400 - 500 kcmil conductor sizes. It is perfect for 15 kilo-Volts cable with 250 - 350 kcmil conductor sizes. Kit has basic insulation level of 110 kilo-Volts. It is compatible with 1250 kcmil, 300 kcmil, 350 kcmil, 400 kcmil and 500 kcmil conductors. Cable insulation has 1.18 Inch outer diameter. Cable insulation ranges from 0.92 - 1.18 Inch. It is ideal for indoor applications. It meets IEEE standards.
Application | Indoor |
Brand | 3M |
Catalog Description | 3MÖ Cold Shrink QT III 7600 T 3G Series Termination Kit includes a non skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield« power cables. The silicone rubber sealing compounds allow the termination to withstand voltages of 5 to 35kV. |
GTIN |
00054007436713 |
Height | 10.7000 |
Height Unit | IN |
Item Status | A |
Length | 16.9600 |
Length UOM | IN |
Mfr. # | 7624-T-110-3G |
Standard | IEEE |
Type | QT-III |
UNSPSC | 26121648 |
Width | 16.6300 |
Width UOM | IN |