Input modules provide the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels
Output modules provide the interface between the PLC and external output devices such as contactors, interposing relays, BCD displays and indicator lamps
GE offers a variety of modules that supportdifferent voltage ranges and types, current capacity, isolation and response time to meet your application needs
Detailed Description: GE Fanuc Isolated relay output discrete output module for 90 - 30 series PLC offers 8 normally open relay circuits to control output loads. Each circuit has an output switching capacity of 4 Amps. Relay outputs control a wide range of load devices such as motor starters, solenoids and indicators. It has LED indicators at the top to offer ON/OFF status of each point. Module has circuit wiring information on the surface towards the inside and circuit identification information on the outside surface. It has a voltage rating of 5 - 30 VDC/250 VAC at 50/60 Hz, current rating of 4 Amps and a power rating of 6 milli-Amps at 5 Volts, 70 milli-Amps at 24 VDCs. Module has a maximum ON response time of 15 milli-seconds and maximum OFF response time of 15 milli-seconds. Input/output module provides the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. It supports different voltage ranges, types, current capacity, isolation and response time to meet your application.
Brand | GE Fanuc |
Connection | (20 Screw Terminal Block |
Internal Power Supply | 6 Milli-Amp at 5 Volt DC; 70 Milli-Amp at 24 Volt DC Relay |
Item | Discrete Output Module |
Load Current | 4 Amp Per Point |
Mfr. # | IC693MDL930 |
Number Of Points | 8 |
Output Range | 0 - 125 Volt DC, 5/24/125 Volt DC Nominal; 0 - 265 Volt AC, 120/240 Volt AC Nominal |
Points Per Common | 1 |
Response Time | 15 ms On/Off |
Type | Series 90-30, AC/DC Voltage, Isolated, Relay Output |