Sign in or register to view your pricing and inventory.

Banner SM2A312LV . Sensor

Manufacturer: Banner Engineering
Mfr. #: SM2A312LV
Item #: 116048
UPC: 662488259648
Login for Availability
Your Price:

Product Details


Product Specification

Brand Banner
Catalog Description MINI-BEAM Self-Contained Non-Polarized Retroreflective Mode Photoelectric Sensor,24 - 240 VAC,Sensing Range: 5 MR,650 NMTR Visible Red LED Sensing Beam,Output: SPST SCR Solid-State 2-Wire Minimum Load Current: 5 MILAMP Maximum Steady-State Load Capabili
Connection 2 MR Cable
Country Of Origin USA
Enclosure IEC IP67 NEMA 1, 2, 3, 3S, 4, 4X, 12 and 13 Thermoplastic Reinforced VALOX
Environmental Conditions 90 PCT At 50 DEG C Relative Humidity


Leakage Current Off-State Output: Less Than 1.7 MILAMP
Lens Acrylic
Mfr. # SM2A312LV
Operating Temperature -20 To 70
Output SPST SCR Solid-State 2-Wire; Minimum Load Current: 5 MILAMP; Maximum Steady-State Load Capability: 300 MILAMP to 50 DEG C, 100 MILAMP to 70 DEG C; Inrush Capability: 3 AMP for 1 S (Non-Repetitive), 10 AMP For 1 Cycle (Non-Repetitive); On-State Voltage Drop: Less Than or Equal to 5 V at 300 MILAMP Load And Less Than or Equal to 10 V at 15 MILAMP Load
Response Time 4
Sensing Beam 650 NMTR Visible Red LED
Sensing Range 5
Size 65.8 MM Length X 12 MM Width X 33.3 MM Height X 18 MM Barrel Diameter
Special Features Rectangular with M18 barrel housing style; Compact, modulated, highly repeatable sensors; Choose standard visible model for highest excess gain and greatest range, or polarized models for detection of shiny objects; Switch-selectable for light-operate or dark operate; Low leakage current and saturation voltage; Physically and electrically interchangeable with 18 MM barrel-typephotoelectrics; Protected against false pulse on power-up and inductive load transients; Controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover; Totally encapsulated, O-ring sealing, and stainless steel screws; MINI-BEAMs may be destroyed from overload conditions; Use on low voltage requires careful analysis of the load to determine if the leakage current or on state voltage of the sensor will interfere with proper operation of the load; The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts
Standard RU And CSA Listed, CE
Type Self-Contained Non-Polarized Retroreflective Mode Photoelectric Sensor
Voltage Rating 24 - 240