
Amperage Rating | 0.75 Amp |
Application | For Multi-Beam Sensors |
Brand | Banner |
Catalog Description | Banner Power Block,105 - 130 VAC,50/60 HZ,Mounting: Wiring Chamber,Output: SPST Solid-State SCR (N.O.), 3/4 AMP Maximum (Derated to 1/2 AMP at 70 DEG C) Maximum Inrush: 10 AMP for 1 S or 30 AMP for 1 AC Cycle (Non-Repeating) On-state Voltage Drop: Less |
Connection | Terminal |
Country Of Origin | USA |
Frequency Rating | 50/60 |
GTIN |
00662488163846 |
Item | AC Power Block |
Material | Thermoplastic |
Mfr. # | PBA |
Mounting | Wiring Chamber |
Special Features | Most commonly used for AC operation; Range depends on sensor; 4-Wire operation; The output is rated for 250V AC maximum, and all can switch a voltage which is different than the supply as long as both AC circuits share a common neutral; Designed to handle the inrush current of AC inductive loads like motor starters and solenoids and the "holding current" specification of any inductive load should not exceed the 750 MILAMP output rating; Will interface directly to all AC programmable controller inputs; Contain built-in transient suppression to prevent false turn-on or damage from inductive loads and line "spikes"; Outputs of multiple power blocks may be wired in series or parallel for "AND" and "OR" logic functions |
Standard | UL And CSA Listed |
Standards | UL Listed, CSA Certified |
Type | 3 And 4-Wire |
Voltage Rating | 105 - 130 Volt |