Enclosures furnished with internal ground screw
Smooth, rounded integral bushing in each hub protects conductor insulation
Detailed Description: Appleton Non-Sealed dead-end tumbler switch has current rating of 20 Amps and voltage rating of 120-277 VAC. Switch comes with hub size of 1/2 inches. This 1-Pole switch features malleable iron body and cover with nylon 6/6 handle. It has triple coat finish that includes zinc electroplate, chromate and epoxy powder coat for added corrosion resistance. Switch incorporates front operated type actuator. Enclosure of switch has external mounting lugs for easy mounting. This enclosure comes with internal ground screw. Stainless steel hex head cap screw aids for attaching cover to mounting enclosure. It is explosion-proof and dust-ignition-proof for added safety. Switch is perfect for use in classified areas where ignitable vapors, gases or highly combustible dusts are present. Tumbler switch is UL listed.
Amperage Rating | 20 |
Application | For Arcing Of Enclosed Switches In Ignitable Atmospheres During Connect And Disconnect Operation Of Lighting And Light Power Loads |
Brand | Appleton |
Catalog Description | EFS Series 1-Gang Tumbler Switch, Voltage Rating: 120 - 277 VAC, Amperage Rating: 20 AMP, Number Of Poles: 1, Actuator: Front Operated, Enclosure: NEMA 7CD, 9EFG, Mounting: Surface Mount With 1/2 IN Dead-End Hub, HP Rating: 1 HP At 120 VAC, 2 HP At 240 VAC, Material: Malleable Iron Body, Nylon 6/6 Handle, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Height: 4.63 IN, Width: 3 IN, Depth: 4.53 IN, Standard: UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Division 1 And 2, Groups C, D, Class II, Division 1 And 2, Groups E, F, G, Class III, For Arcing Of Enclosed Switches In Ignitable Atmospheres During Connect And Disconnect Operation Of Lighting And Light Power Loads |
Enclosure | NEMA 7CD, 9EFG |
GTIN |
00781381278751 |
Height | 4.6000 |
Height Unit | IN |
Item Status | A |
Length | 7.5000 |
Length UOM | IN |
Mfr. # | EFS150-F1 |
Mounting | Surface Mount With 1/2 IN Dead-End Hub |
Special Features | Enclosures have external mounting lugs for ease of mounting; Smooth, rounded integral bushing in each hub protects conductor insulation; Enclosures furnished with internal ground screw; Smooth ground mating surfaces assure flame-tight joint between cover and mounting enclosure; Stainless steel hex head cap screws for attaching cover to mounting enclosure; Choice of front-operating or side rocker arm handle each may be locked in ON or OFF position; Each handle has close-tolerance threaded stainless steel shaft to meet explosionproof requirements; Enclosures furnished with internal ground screw; For installation in: Chemical plants, petrochemical plants, refineries, other process industries; For use in classified areas where ignitable vapors, gases or highly combustible dusts are present |
Standard | UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Division 1 And 2, Groups C, D, Class II, Division 1 And 2, Groups E, F, G, Class III |
Type | EFS Series 1-Gang Tumbler Switch |
UNSPSC | 39121565 |
Voltage Rating | 120 - 277 |
Width | 5.6000 |
Width UOM | IN |