Dimension: 4 Inch Dia x 3 Inch Depth
Galvanized steel dust plate
Detailed Description:
Allied Moulded Products Speed Clamps™ Round floor box duplex receptacle with brass cover is designed for wood floor construction and can be installed with multiple floor substrate materials. It measures 4 Inch diameter x 3 Inch. The 2-Pole Receptacle has non-conductive and non-metallic insulation with a grounded bare metal cover. Receptacle has a current rating of 15 Amps and voltage rating of 125 Volts. Receptacle is side wired with steel strap and screw caps. It is used in large floor areas where additional electric outlets are required. It is tamper resistant and has commercial grade finish.
Polycarbonate receptacle box has a duplex brass cover with galvanized steel dust plate construction. It has copper terminals and a closed cell rubber gasket. It features four molded-in speed klamps and two 1/2-Inch knockouts for cable entry. Box has a capacity of 24.5 cubic inches. It is fire resistant for 2 hours. Receptacle is UL listed, passed scrub-water exclusion test and meets NEMA standards.
Application | Floor box assembly for residential wood floor cut-in application for use with nonmetallic sheathed cable. Used in areas of the home with large floor space openings where additional electric outlets are required by National Electrical Code to minimize long extension cord runs. |
Brand | Allied Moulded |
Cable Entry | "Four molded-in Speed Klamps and two 1/2"" knockouts" |
Catalog Description | 24.5 Cu. In. Round floor box assembly with a brass duplex device cover - designed for use in wood floor construction and can be installed with multiple floor substrate materials, meets scrub-water exclusion test, tamper resistant receptacle, simple exterior shape for easy cut-in application - Floor box assembly for residential wood floor cut-in application for use with nonmetallic sheathed cable. Used in areas of the home with large floor space openings where additional electric outlets are required by National Electrical Code to minimize long extension cord runs - Polycarbonate box, brass cover, galvanized steel dust plate, nonmeatallic device with copper terminals and brass ground, closed cell rubber gasket - Size: Box - Dia=3.936", Depth=3.0" Cover - Dia=5.25", Thickness=.217" - Mount with Metal wing brackets/nonmetal flange floor or ceiling compression |
Construction | Cast cover, injection molded box |
Finish 2 | Black;Brass |
GTIN |
00085339941255 |
Height | 3.0000 |
Height Unit | IN |
Insulation | Nonconductive nonmetallic box & bare metal cover grounded |
Item Status | A |
Knockouts | True |
Length | 3.9400 |
Length UOM | IN |
Material | Polycarbonate box, brass cover, galvanized steel dust plate, nonmetallic device with copper terminals and brass ground, closed cell rubber gasket;WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Mfr. # | FB-3 |
Mounting | Metal wing brackets/nonmetal flange floor or ceiling compression |
Number Of Outlets | 2 |
Special Features | designed for use in wood floor construction and can be installed with multiple floor substrate materials, meets scrub-water exclusion test, tamper resistant receptacle, simple exterior shape for easy cut-in application |
Standard | UL 514 C |
Type | Round floor box assembly with a brass duplex device cover |
UNSPSC | 39121307 |
Width | 3.9400 |
Width UOM | IN |